- ULTRA LOW PRESSURE DROP SUPERB FILTER is high volume Use a frame that has been
   patented with HEPA FILTER TYPE. Electrostatic coating is high on the filter surface by
   electro- molecular nanofiber. This product is a high-performance HEPA FILTER designed to
   collect ultrafine and fine dust by formingpressure conditions that are 30 to 40 percent lower
   than conventional products.
   In the case of HEPA FILTER, dust was collected with the size of the size of the mouth.
   However, the product is designed to increase the penetration of air and reduce pressure loss
   by increasingthe inlet diameter. The replacement time of the static electricity shall be 4,500
   hours, which may vary depending on the conditions of use (distribution, use time, use of the
   pretreatment filter).
- This filter is used to maintain the cleanliness of the CLASS 1000~CLASS10,000.
- This filter is H12 - H13 product and collects more than 99.97% dust of 0.3μm.
   (The static electricity may be reduced depending on the duration of use and collection of
   ultra-fine particles, so accurate replacement time must be designed.)
- Used in semiconductor, electric & electronics, hospitals, sterile rooms, and food facilities that
   require high levels of cleanliness.
- Improve energy savings by 30-40% for greater operational savings
- This filter is vulnerable as it can be broken down into alcohol mist.
   (Note: TEST is tested in NACL and KCL except PAO with alcohol content.)
- Suitable for controlling contamination such as viruses, carbon dust, salt damage,
   and radon compounds.
- The frame has anodized finish to prevent corrosion, heat resistance and oxidation.
- ULTRA LOW PRESSURE DROP SUPERB FILTER should be applied after using
   a pre-processing filter. (Collecting fine dust (PM2.5), airborne particulates (PM10),
   pollen, and vermin may shorten the use cycle)
ㆍProducts: ULTRA LOW PRESSURE DROP SUPERB HEPA FILTER - NFND HEPA Filter
ㆍType : Cell-Pleat & Ultra Deep Pleat ㆍFrame : Anodizing Film Aluminium Extruding case
ㆍMedia : NFND Media ㆍSeparators: Aluminium sheet ㆍGasket: EPDM or Neopren
ㆍSealant: Polyurethane ㆍEncourage final pressure drop: 350Pa / max. 400Pa
ㆍEfficiency: EN1822 (H12, H13) ㆍAll filters scan test
ㆍMPPS efficiency: 0.3㎛ ≥ 99,97%; 99,95% at MPPS ㆍTest : kcl or Nacl
ㆍTemperature: 70ºC Humidity: 100% RH
MODEL Grade Dimensions Air flow
Volume
(Cmm)
Pressure
Drop
(Pa)
Weight
(Kg)
H (Height) W (Width) T (Thickness)
ULTRA LOW PRESSURE
DROP SUPERB HEPA
FILTER
(ULPD HEPA FILTER)
H11 610 610 292 50 120 10.5
H12 610 610 292 50 140 10.5
H13 610 610 292 50 150 10.5

- ULTRA LOW PRESSURE DROP FINO MEDIUM FILTER is high It is produced with
   MEDIUM FILTER TYPE.
   Electro-tapping nanofiber produces high-efficiency static electricity on the surface of the filter.
   This product is a high-performance MEDIUM FILTER designed to collect ultra-fine or fine dust
   with high efficiency while maintaining a pressure of 30 to 40 percent lower than other
   products.
   The GLASS FIBER MEDIUM FILTER was collected using particle size.
   However, this product is designed to collect using static electricity due to large air penetration
   holes, increasing penetration and reducing pressure loss. The replacement period for this filter
   is about 3,500 hours.
   (Differentiate depending on type of dust, usage time, use of different filters, etc.)
- Products from MERV13 to 15 are excellent for maintaining indoor cleanliness.
- This product can collect more than 90% dust from 2.5μm.
   (The static electricity can be reduced according to
   the duration of use and collection of ultra-fine particles, thus the detailed replacement time must be designed.)
- It is suitable for use in commercial buildings, multi-use facilities, department stores, schools, stations, and
   factories where indoor protection from fine dust is required.
- Used to remove bacteria, carbon dioxide, salt damage, etc.
- Use high efficiency to hold dust and high air penetration.
- Electrostatic processes are vulnerable to alcohol undiluted solution.
   (Note: Test specimens with NACL and KCL without alcohol.)
- This product can use electricity 20 to 30 percent lower than the existing product.
- ULTRA LOW PRESSURE DROP FINO MEDIUM FILTER should be used in conjunction
  with PRE FILTER. (The filter surface can be blocked with PM10, pollen, vermin, and dust to shorten
  the service period.)
ㆍProducts : ULTRA LOW PRESSURE DROP FINO MEDIUM FILTER - ULPD MEDIUM Filter
ㆍType : Cell-Pleat & Ultra Deep Pleat ㆍFrame : Galvanized Metal
ㆍMedia : ULPD Media ㆍSeparators: Hot - Melt ㆍGasket: Cap Close
ㆍSealant: Polyurethane ㆍEncourage final pressure drop: 350Pa / max. 400Pa
ㆍEfficiency: EN779 (F7,F8,F9) and ASHRAE STD 52.2 MERV 13~15
ㆍMPPS efficiency: 2.5㎛ ≥ 80%; at MPPS ㆍTest : kcl or Nacl ㆍTemperature: 70ºC Humidity: 100% RH
MODEL Grade Dimensions Air flow
Volume
(Cmm)
Pressure
Drop
(Pa)
EN779 MERV H (Height) W (Width) T (Thickness)
ULTRA LOW PRESSURE
DROP FINO -
MEDIUM Filter
(ULPD MEDIUM FILTER)
F7 13 594 594 100 56 120
F8 14 594 594 100 56 140
F9 15 594 594 100 56 120